Tools Engineering

• Input 1 phase • 220v • 0.4 to 2.2kW • Up to 150% overload for 60s

• Input 3 Phase• 400v• 0.75 to 15 kW• Up to 150% overload for 60s

• Input 3 Phase• 400v• 1.5 to 315 kW• Up to 150% overload for 60s

• IGBT or SKIIP• 2-300 HP (1.5-225 kW)• IP-30 (IP-60 optional)• Input : 3-Phase• Sensorless flux vector control• Control via PLC or computer

• Models : A80-A650• Line voltage : 3-Phase, 380 VAC• Rating : 58-830 Amp (3 wire)• Rating : 95-1,330• Enclosure : IP00, forced-air ventilation• Duty : 100% rated current plus 12 starts per hour

• Input : 1-Phase, 200-240V• 0.5-3 HP (0.37-2.2 kW)• Up to 150% overload within 60 seconds• Fast current limitation• 150% overload current

• Simple commissioning• 0.3-4 HP (0.25-3 kW)• Input : 1-Phase, 200-240V• IP-20• Modular construction• 150% overload current

SPESIFICATION GEAR REDUCER MOLLER HELICAL TYPE MT• Horizontal Mounting • Input Power : 0.25-270 HP (0.18-200 kW)• Output Torque : 2.5-48,000• Output Speed : 0.1-1,200 rpm

SPEFIFIKASI GEAR REDUCER MOLLER HELICAL TYPE MB• Input shaft perpendicular to output shaft• Input Power : 3.75-7,200 HP (28-5,400 kW)• Output Torque : 470,000 Nm• Output Speed : 1.7-1,200 rpm

GEAR REDUCER WITHOUT MOTOR• Horizontal, complete with motor• Reduction Ratio : 11, 17, 23, 29, 35, 43, 59, 71, 87• High overload capacity - up to 350%• High efficiency of over 92%• Less vibration and low noise• Long lifetime• For various types of applications